SV Rolling Needle Marker

Due to the wheels and the high handle you have a very good handling for moving the needle embosser.
You no longer have to bend down to mark rolled flat steel, as is the case with conventional manual needle embossers.
Large marking area of 200×100 mm, multi-line marking possible.

  • Rugged mechanics
  • great handling with regard to the handles
  • Electromagnet for attracting and fixing to the component (steel)
  • deep marking up to 0.5 mm at 520 N/mm² in steel, suitable for marking rolled flat steel

Scan and mark codes

Optionally with barcode/QR-Code scanner module.
For scanning barcodes or QR codes to automatically define the stamp image in the control system.
The tablet on the handle is used to check the scanned code, it displays the stamp image to be marked.

SV Rolling Needle Marker H200x100 P35
D x W x Happrox. 350 x 480 x 942 mm
Weightca. 50 kg
Marking field200 x 100 mm
Resolution0,1 mm
Speeddepending on marking parameters
ControlSV 2001 und UMC 112
Needle systemP35
Energy230V, 50Hz
Compressed airmax. 7-8 bar, 8 mm Air connection