Large Stamp Presses

For railway wheels, steel rings and heavy plates

The stamping press is used for marking (stamping) railway wheels, steel rings and heavy plates.

The railway wheels are stamped on the upper side of the running rim. Alternatively, the press is designed for stamping on the end faces of the hubs of running wheels. This requires a separate stamping tool.

Steel plates are marked on the upper and lower sides of the plate. Optionally, the sheet side surface can also be stamped. Thus the product can be identified on each side.

Type: HSP
Product temperature: 0° – 1.200°C
Field of activity: railway wheels, steel rings, heavy plates
Stamp printing: 1,600 – 3,500 KN
Cycle time: approx. 15 s
Type of marking: Alphanumeric and logos
Character height: 10-15 mm
Stamp depth: 1-7 mm (adjustable)
Press stroke: up to 350 mm