SV Built-in Marker
Optimal for OEMs, Tier II & Tier III – for welding cells, assembly lines, test cells or direct integration in robots
- Machines are available as tabletop or built-in units
- Nearly noiseless marking according to EU guidelines for occupational safety
- Different marking areas from 50 x 90 mm up to 300 x 300 mm
- Smallest designs from 178.5 x 155 x 107 mm (H x W x D)
- Marking depth up to 0.4 mm in cold steel at a tensile strength of 520 N/mm² with P21 cylinder
- Marking speed up to 10 characters/second in 3 mm font height
- paving machines are equipped with facetted sheet metal as standard
- Standard cable length 2.5 meters, extension possible on request
| SV Built-In E50/90 | |
|---|---|
| D x W x H | 175,4x176,0x145mm |
| Weight | approx. 5,2 Kg |
| Marking field | 50 x 90 mm |
| Resolution | 0,1 mm |
| Speed | depending on marking parameters |
| Controls | SV 2001 |
| Needle system | P10, P15, P21 |
| Energy | 230V, 50Hz / optional 115V, 60Hz |
| Compressed Air | max. 6 bar, 6 mm Air connection |
| SV Built-In E100/150 | |
|---|---|
| D x W x H | 240 x 266 x 260 mm |
| Weight | approx. 12,0 Kg |
| Marking field | 100 x 150 mm |
| Resolution | 0,1 mm |
| Speed | depending on marking parameters |
| Controls | SV 2001 |
| Needle system | P10, P15, P21, P35 |
| Energy | 230V, 50Hz / optional 115V, 60Hz |
| Compressed Air | max. 8 bar, 8 mm air connection |
| SV Hand-Held H40/95 | |
|---|---|
| D x W x H | 178,5 x 162,5 x 107 mm (with handgrip 238,5 mm) |
| Weight | approx. 3,0 Kg |
| Marking field | 40 x 95 mm |
| Resolution | 0,1 mm |
| Speed | depending on marking parameters |
| Controls | SV 2001 |
| Needle system | P10, P15, P21 |
| Energy | 230V, 50Hz / optional 115V, 60Hz |
| Compressed Air | max. 6 bar, 6 mm air connection |