Refurbished & Demonstration machines
SSP 7006 Pneumatic-hydraulic press (punch press)
- The press model is designed as a column frame with 60 kN compressive force
- The working cylinder of this press is a hydro-pneumatic pressure intensifier
- Due to the internal pressure transmission from compressed air to oil, forces can be built up in spite of the small dimensions of the cylinder, which otherwise only expensive high-pressure hydraulics can provide – compressed air up to max. 6 bar is required as a medium
- The tappet pressure can be adjusted as required via a pressure control valve
- The SSP 7006 has a power stroke of 4 mm and is therefore almost completely accident-proof
- The press is delivered ready for connection, with base frame (table)
- The press is equipped with an electro-pneumatic control system Pneumo-hydraulic
Price: 14.490,00 €
Special price: 11.990,00 €
SPP 7002 Pneumatic-hydraulic press (punch press)
- The press model is designed as a C-frame with 20 kN compressive force
- The quick lifting cylinder of the press is a hydro-pneumatic pressure intensifier
- Due to the internal pressure transmission from compressed air to oil, forces can be built up in spite of the small dimensions of the cylinder, which otherwise only expensive high-pressure hydraulics can provide – compressed air up to max. 6 bar is required as a medium
- The tappet pressure can be adjusted as required via a pressure control valve
- The SSP 7002 has a power stroke of 4 mm and is therefore almost completely accident-proof
- The press is delivered ready for connection, with base frame (table)
- The press is equipped with an electro-pneumatic control system Pneumo-hydraulic
Price: 9.490,00 €
Special price: 7.990,00 €
SPP 7002 Pneumatic-hydraulic press (punch press)
- The press model is designed as a C-frame with 20 kN compressive force
- The quick lifting cylinder of the press is a hydro-pneumatic pressure intensifier
- Due to the internal pressure transmission from compressed air to oil, forces can be built up in spite of the small dimensions of the cylinder, which otherwise only expensive high-pressure hydraulics can provide – compressed air up to max. 6 bar is required as a medium
- The tappet pressure can be adjusted as required via a pressure control valve
- The SSP 7002 has a power stroke of 4 mm and is therefore almost completely accident-proof
- The press is delivered ready for connection, with base frame (table) and two-hand control
- The press is equipped with an electro-pneumatic control system Pneumo-hydraulic
Price: 10.490,00 €
Special price: 8.490,00 €