SV Controls

Universal control for needle and scribe embossers

The control unit SV2001 is used to control all our needle embossers and scribe embossers.

With this control all kinds of data for marking are sent to the embossers.

  • 2D codes (DataMatrix), QR-, barcodes,…
  • Company logos and other graphics
  • All other conceivable product data

Various communication interfaces make it possible to send the corresponding information to the controller. Modifiable data, such as date, time, batch number, material composition, etc. are automatically generated by the controller according to previously defined criteria. Furthermore, it is possible to manipulate entered data with the integrated script interface.

SV2001
ComputerSTOMMEL+VOOS PC control with operating system Embedded Linux and 400 MHz clock frequency, serial interface, USB, Ethernet, Profinet, Profibus, EtherNet/IP, DeviceNet, and SVGA interface. IP31 Protection against contact with tools and against foreign objects with diameters > 2.5 mm, protection against vertically falling water drops.
MemoryCompact Flash 512 MB
Motor Control2 axis motor control for bipolar control of 2-phase stepper motors
Inputs / OutputsDigital, optional external file selection (I/O BU3), 2 safety inputs up to PL e (DIN EN 13849-1)
DisplaySVGA 800 x 600 pixels, large mark preview to control the marking data
W x D x H310 x 300 x 170 mm (without handgrip, plug and cable)
KeyboardIntegrated keyboard / external keyboard
Interfaces4 x USB interface (keyboard, mouse, USB stick,...)
Ethernet: SMB, control protocol
RS232/RS485: Control protocol, 24V
I/O: Start, E-Stop, file selection / Profibus DP

Other functions

  • 17 different fonts, two in Cyrillic
  • 13 Languages menu
  • Concave/convex and angle marking
  • Automatically generated numbering, day, date, time, shifts
  • Comprehensive teach functions
  • Different data transfer types from PC or from higher-level controllers

Special options

  • Second stepper motor for simultaneous control of an additional marking head
  • Is there no longer a special option

With this control all kinds of data are sent to the end systems for marking.

For example:

  • 2D codes (DataMatrix)
  • Serial numbers
  • Logos and graphics
  • All other conceivable product data

Modifiable data such as date, time, batch number, material composition etc. are automatically generated by the controller according to previously defined criteria.

Various interfaces make it possible to send the corresponding information to the controller beforehand. Using a barcode scanner, for example, employee and extensive material information can be scanned in and later compactly embossed on the product as a 2D code (this is just one of many examples).

  • Microsoft Windows™ license costs not applicable
  • User-friendly, intuitive interface
  • Highest stability
SV2002
ComputerSTOMMEL+VOOS PC control with operating system Embedded Linux and 400 MHz clock frequency, serial interface, USB, Ethernet, Profinet, Profibus, EtherNet/IP, DeviceNet, and SVGA interface. Entire computer unit in 19" desktop housing of protection class IP 54
MemoryCompact Flash 512 MB
Motor Control2 axes, optional 3 axes
Inputs / OutputsDigital, optional external file selection (I/O BU3), 2 safety inputs up to PL e (DIN EN 13849-1)
DisplaySVGA 800 x 600 pixels, large mark preview to control the marking data
W x D x H443 x 352 x 183 mm
KeyboardIntegrated keyboard / external keyboard
Interfaces4 x USB interface (keyboard, mouse, USB stick,...)
Ethernet: SMB, control protocol
RS232/RS485: Control protocol, 24V
I/O: Start, E-Stop, file selection / Profibus DP