SV Hand Held Marker
- Lightweight marking heads, weight from approx. 2.5 kg
- Inexpensive solution for marking a wide variety of components
- Minimal setback during marking, low deformation of hollow parts
- Large marking areas from 40 x 95 mm up to 300 x 300 mm
- Small design dimensions (H x W x D) 178.5 x 155 x 107 mm plus handle (238.5 mm)
- Stable set up frame for flat and round workpieces
- Marking depth up to 0.4 mm in cold steel at a tensile strength of 520 N/mm²
- Marking speed up to 10 characters/second in 3 mm font height
- Cable length 5 meters
Special options:
- Cable lengths 5, 10, 15, 20 m (others on request)
- Mounting frame with electromagnets
- Facetted plate cover
| SV Hand-Held H40/95 | |
|---|---|
| D x W x H | 178,5 x 162,5 x 107 mm (with handgrip 238,5 mm) |
| Weight | approx. 3,0 Kg |
| Marking field | 40 x 95 mm |
| Resolution | 0,1 mm |
| Speed | depending on marking parameters |
| Controls | SV 2001 |
| Needle system | P10, P15, P21 |
| Energy | 230V, 50Hz / optional 115V, 60Hz |
| Compressed Air | max. 6 bar, 6 mm air connection |
| SV Hand-Held H40/150 | |
|---|---|
| D x W x H | 178,5 x 210 x 107 mm (with handgrip 238,5 mm) |
| Weight | approx. 3,8 Kg |
| Marking field | 40 x 150 mm |
| Resolution | 0,1 mm |
| Speed | depending on marking parameters |
| Controls | SV 2001 |
| Needle system | P10, P15, P21 |
| Energy | 230V, 50Hz / optional 115V, 60Hz |
| Compressed Air | max. 6 bar, 6 mm air connection |
| SV Hand-Held H100/150 | |
|---|---|
| D x W x H | 240 x 266 x 260 mm (with handgrip 350,0 mm) |
| Weight | approx. 15 Kg |
| Marking field | 100 x 150 mm |
| Resolution | 0,1 mm |
| Speed | depending on marking parameters |
| Controls | SV 2001 |
| Needle system | P10, P15, P21, P35 |
| Energy | 230V, 50Hz / optional 115V, 60Hz |
| Compressed Air | max. 8 bar, 8 mm air connection |
Robust mechanics, great handling regarding the handles, electromagnet for tightening and fixing to the component (steel), ring head screw for fixing to a slewing crane with balancer, deep marking up to 0.5 mm at 520 N/mm² in steel, e.g. suitable for marking railway wheels, rolled rings and steel beams as well as flat steel.
| SV Rolling Needle Marker H200x100 P35 | |
|---|---|
| D x W x H | approx. 350 x 480 x 942 mm |
| Weight | ca. 50 kg |
| Marking field | 200 x 100 mm |
| Resolution | 0,1 mm |
| Speed | depending on marking parameters |
| Control | SV 2001 und UMC 112 |
| Needle system | P35 |
| Energy | 230V, 50Hz |
| Compressed air | max. 7-8 bar, 8 mm Air connection |